WL-5460AP v2
WL-5460AP v2
WL-5460AP v2
WL-5460AP v2

WL-5460AP v2

802.11g Multi-função Ponto Acesso Wireless

Caracteristicas Sumarias
  • 802.11g Multi-função Ponto Acesso Wireless
  • 54Mbps Multi-função Wireless AP
  • 2 portas x 10/100Mbps, 2MB Flash, 16MB SDRAM
  • Até 26dBm potência(América do Sul) e conector antena R-SMA
  • 7 Modos Operação Wireless
  • Controlo Largura Banda e Alinhamento de Antena Pesquisa de Sinal
  • Isolamento de Cliente, Watchdog, e Regulação de Potência TX
O AirLive WL-5460AP é o Ponto Acesso multi-função 802.11b/g mais popular em todo o mundo que opera na banda de frequência dos 2.4GHz. Ele possui 8 incriveis modos operação wireless para todos os tipos de operação wireless.
7 Modos Wireless
O WL-5460AP v2 caracteriza um incrivel firmware 7-modos.
AP Modo : O WL-5460AP v2 é o hub central para todos os seus dispositivos wireless.
Bridge Modo : Para conectar juntamente 2 LANs wirelessly.
Client Mode : Turn the WL-5460AP v2 into a wireless card so you can connect with remote AP.
Repetidor WDS : Para aumentar a cobertura wireless de um WDS AP/Router activo
Repetidor Universal : Função repetidor universal exclusiva da AirLive's permite ao WL-5460AP v2 estender a cobertura do seu AP/Router, mesmo que o seu AP/Router nãp possua a função WDS!
WISP Router : O modo WISP é similar ao Modo Cliente. É adicionada a função partilha de IP e assim pode partilhar a conexão WISP com muitos PCs.
WISP+Repetidor Universal : O modo WISP+Repetidor Universal permite-lhe partilhar ambas ligações, sem fios (wireless) e com fios de ambos os lados.
AP Router : O WL-5460AP trabalha como um router wireless. A LAN2 ficará como a porta WAN.
Wireless Isolamento Cliente
O WL-5460AP v2 caracteriza a função Isolamento Cliente Wireless, disponivel anteriormente só nos mais dispendiosos APs. Quando activar esta função, os clientes wireless não terão a possibilidade de se verem uns aos outros. Portanto, é uma função importante para escritórios e operadores de Hotspot para proteger os diferentes utilizadores wireless.
ACK Timeout e TX Regulação de Potência
O WL-5460AP v2 caracteriza a função ACK timeout para lhe permitir ajustar o valor do timeout para operações de longa distância. Além disso, 5-niveis ajustamento potência TX permite-lhe combinar diferentes antenas para o cumprimento da legislação. A possibilidade de definir uma menor potência de saída é também crucial se pretender combinar o AP com um amplificador de potência externo
Extensão Caracteristicas de Segurança
O WL-5460AP v2 suporta funções de segurança WEP, WPA e WPA2. Além disso, WPA empresa para autenticador 802.1x são apresentados para modos AP e WDS. A combinação de Encriptação, Esconder SSID e Control Acesso assegura que a sua rede wireless fica completamente segura de intrusos.
Quer seja para ambiente doméstico ou caseiro, a familia AirLive 802.11g trás-lhe o máximo de desempenho e segurança para os dias de hoje da alta velocidade de redes wireless.
* Antes de configurar a regulação de potência TX, limpe por favor primeiro os cookies no seu PC first.
 
Diagrama de Aplicação
Caracteristicas Funções AP, Bridge, Cliente, Repetidor
WISP Cliente modo Router
Modo WISP + Universal Repeater
Antena Destacável, 2 portas LAN
802.1x, WPA, WPA2 e Web Mgt.
TX regulação potência em 4 níveis
Watchdog função usa PING
Wireless Isolamento Cliente (e8 firmware)
ACK Timeout Ajustamento
DHCP Relay função
802.11g Protecção
Hardware 2 x portas 10/100Mbps LAN
2MB Flash, 16MB SDRAM
Porta Reversed SMA Antena
Indicadores LED, Power, LAN, WLAN 
Antena 2 dBi Antena Dipolo destacável
Reversed SMA Conector
Gama Frequências USA (FCC) 11 Canais: 2.412GHz~2.462GHz
Europa (ETSI) 13 Canais : 2.412GHz~2.472GHz 
Rx Sensibilidade @ 25°C
IEEE 802.11b
Min (dBm)
1Mbps
-91
2Mbps
-90
5Mbps
-90
11Mbps
-86
IEEE 802.11g
Min (dBm)
6Mbps
-87
9Mbps
-87
12Mbps
-86
18Mbps
-84
24Mbps
-82
36Mbps
-78
48Mbps
-73
54Mbps
-70
Técnica de Modulação 11g Orthogonal Frequency Division Multiplexing (64QAM, 16QAM, QPSK,
BPSK)
11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Taxa Dados: 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps
Potência Saída Versão EU e FCC
- 20dBm Max
- Ajustável em 6 níveis
Versão Brasil
- 26dBm Max
- Ajustável em 8 níveis
WISP Modo DHCP, PPTP, L2TP, PPPoE ISP Autenticação Suporte
Wireless função Cliente como WAN
WISP modo não é o mesmo que modo router
Para configurar o modo WISP, seu PC tem que conectar na porta  LAN
Segurança 64/128-bit WEP
WPA/WPA2-PSK suporte
802.1x Radius Suporte
WPA Enterprise suport em modo AP/WDS
Configuração Gestão Web
WDS modos (Bridge, Cliente, Repetidor)
Ocultar ESSID
802.1x
Endereço Mac Controle
Tabela Acesso MAC
Wireless Cliente Isolamento (e8 firmware)
SSID, Canal, RTS Threshold, Frag Threshold
Ambiental Temperatura operacional: 0~60℃
Humidade operacional (não-condensada): 20~80%
Temperatura arazenada: -20~65℃
Humidade armazenada: 95% Max
Alimentação DC12V
EMI FCC, CE
Peso Produto (g) 180 g
Tamanho Produto
( C x L x A (mm) )
135 x 100 x 26mm



Software & Firmware

  • ETSI firmware, Airlive WL-5460APv2_e19 Details 2013/05/10
  • SA firmware, Airlive WL-5460APv2_e19 Details 2013/05/10
  • EU Firmware versão e19_b3, Adiciona funções Desactivar NAT e Limitar Clientes Wireless , Details 2011/08/24

FAQ

  • I want to connect to the internal server from internet. What can I do? Details
  • I have a ISP’s wireless signal near my house, how could I connect WL-5460APv2 to internet? Details
  • I have a ISP’s wireless signal near my house, how could I connect WL-5460APv2 to internet? Details
  • When I login the HTTPS web management, there's a message about wrong security certificate ,what can I do? Details
  • I have a remote AP ,how to extend the coverage of the remote AP by WL-5460APv2? Details
  • Why can't I get into the web management , even I press the reset button to reset WL-5460APv2 to factory default setting? Details
  • The value of the signal level in the site survey window ,is it a percentage or dBm? Details
  • What color of the WL-5460AP’s LED turn on? Details
  • Why can't I proceed the emergency function? Details
  • My computer or mobile phone has MAC address starting with something not "00", but I can't seem to add the MAC address to the Access Control List? Details
  • What are the available Telnet and SSH commands? Details
  • What is the default IP address of my AP? Details
  • Where can I find the wireless MAC adress of my AP? Details
  • When I change the WL-5460AP to "AP Router" mode, which LAN port will become the WAN port? Details
  • I tried to use the Emergency Upgrade procedure to restore firmware. But the process failed in the middle. What is wrong? Details
  • "I have 2 x WL-5460APv2 which are placed in different rooms, the link is O.K. but I felt the signal strength is not strong enough. So I change the original 2dBi antenna to WAI-08 8dBi rubber dipole antennas. Then, the link got very unstable. What is the problem? " Details
  • The Bridge mode Setup Guide. Details
  • I am trying to use the WL 5460AP as a WDS repeater, I have some questions: 1. must the SSID the same as the SSID of the AP? 2. How should I configure the DHCP? Details
  • How to secure network with WL-5460AP ? Details
  • I was configuring AirLive 802.11G Wireless AP (WL-5460AP v2), Its quite working over Universal Repeater Mode however when I used WISP and WISP + Universal Repeater Mode I was not able to find the SSID over the wireless. What should be the setting for this, our setup from our source AP was IP authenticated. Details
  • How do I configure QoS for WL-5460AP or WL-5470AP new firmware? Details
  • How to configure 5460APv2 x 3 to work in point to multipoint mode? Details
  • I have a modem of my ISP installed at home. I want to connect my WL-5460AP v2 to it, so need to connect one of the two Ethernet ports of the back of the WL-5460AP to the modem exit (Ethernet port). Only 1 IP address comes out of the modem, so I have a modem of my ISP installed at home. I want to connect my WL-5460AP v2 to it, so need to connect one of the two Ethernet ports of the back of the WL-5460AP to the modem exit (Ethernet port). Only 1 IP address comes out of the modem, so the WL-5460AP needs to behave as router as well. Can it be done and if so, which settings do I need to select to:(1)  Use it as a router (providing IP addresses to the multiple PC’s that want to connect to the WL-5460AP(2)  Can I still also use the second Ethernet port to connect a wired PC to the WL-5460AP? Details
  • WL-5460AP Telnet Command Guide (Firmware e11 or later) Details
  • I have tried to upgrade the WL-5460AP to the 3rd party firmware. But it doesn't allow me to upgrade. What should I do? Details
  • I use WL-5460AP as AP mode, connect directly to a RADIUS server by an Ethernet cable. I want to use RADIUS server for authentication, what do I provide as information? Details
  • The data rate rating only represent the physical layer data rate. But what is the actual throughput for the IEEE Wireless Standards? Details
  • How to set subnet in my PC or NB when I want to enter AirLive product's Web UI ? Details
  • When I set my AP's TX power to level1, the connection is unstable? Details
  • After having upgraded firmware 5460APv2_e10.1 or newer, I set "Wireless Client Isolation" to ENABLE. But clients devices can still see each other. What should I do? Details
  • I heard WL-5460AP has emergency code function that can restore the machine after firmware crashed. How can I use it? Details
  • I download the new WL-5460APv2 firmware. But when I set the the device to AP, Client, or Repeater mode. My PC can't get on the Internet. Why? Details
  • I download the new WL-5460APv2 firmware. But I can't get into the AP's remote management or Ping to the AP from the wireless side? Details
  • When my AP is installed in an outdoor area with a lot of 2.4Ghz traffic, my AP's signal become unstable sometimes Details
  • When I try to enter the MAC address in the WDS field, the Web browser tell me I entered the wrong format. Details
  • When I try to use web management. My browser ask me for Username, what is it? Details
  • The MAC address on the device label is wrong? Details
  • How does the watchdog function works? Details
  • Why is my AP not stable? Details
  • How come the WDS repeater function between WL-5460AP and WIAS-1000G are not working? Details
  • How come the TX power regulation doesn't seem to work correctly? Details
  • My wireless transfer is very unstable or stopped sometimes. Details
  • Why does my AP or Wireless Router doesn't work with Centrino? Details
  • How can I extend the distance using extra AP? How can I create a wireless repeater(WDS)? Details
  • How many users can we link to an access point? Details
  • When I surf the Internet, I can ping but I can't surf some websites. Why? Details
  • What is AdHoc and Infrastruture ? Details
  • What is WEP encryption? Details
  • How can I change to a different wireless network in WinXP? Details
  • In some wireless devices, the ESSID (SSID) is case sensitive Details
Modelo
WL-5460AP v2 802.11g Wireless Access Point, South America
EAN Code
  13 Code 14 Code
WL-5460AP v2 4719869612908 14719869612905
Embalagem Standard
Tipo Embalagem  packing box
Tamanho Embalagem 60 x 170 x 245 mm
Peso Embalagem 0.9 kg
Conteúdo Embalagem WL-5460AP, CD-ROM, Quick Setup Guide, 12V Power adapter, Antenna, RJ-45 Cable, Wall mounting kit
Embalagem Cartão
Quantidade 20
Dimensões 50 x 35 x 36.5 cm
Peso 19 kg
Top